Blogs & Photos

 

 

Small R2K

     
 

Small R2K

R2K Contracting

July 7, 2018

Overhaul the front axle and diff out of the Ford New Holland 545D FEL

 

 

Small R2K

     
 

Small R2K

R2K Contracting
 

July 7, 2018

Good old Vickers PVH74 out of a John Deere 9400 tractor with well over 10000 hours on it, something in the tank collapsed and got caught in the inlet port and damaged the valve plate

 

Small R2K

     
 

Small R2K

R2K Contracting
July 7, 2018
 

Brand new M + S hydraulic MT 200 SLU that we use as a PTO drive having the seal lubed and tested before sale, we have had some trouble with shaft seal leaks. and it seems that we are the only people in the world to have this problem 

Small R2K

     
 

Small R2K

 
R2K Contracting
 
 
July 7, 2018
 

Reseal a wheel motor and final drive on a John Deere 4700 SP sprayer

wp_20180604_003wp_20180604_002wp_20180602_014wp_20180602_013wp_20180602_012wp_20180601_003wp_20180602_011wp_20180602_006wp_20180602_008wp_20180601_001

wp_20180602_003wp_20180602_004

 

Small R2K

     
 

Small R2K

 
R2K Contracting
 
 
July 7, 2018

Modify a fan drive to belt drive on a John Shearer bar

Small R2K

     
 

Small R2K

R2K Contracting
July 7, 2018
 

Repair a hydraulic problem on a Volvo front end loader…. blown fuse 

Small R2K

     
 

Small R2K

R2K Contracting
July 7, 2018
 

Remove reseal and replace some Baker Hydraulic cylinders of an air seeder bar

Small R2K

     
 

Small R2K

R2K Contracting
July 7, 2018
 

Remove the front axle and Diff out of a Ford New Holland 545D industrial loader, a lack of oil 

Small R2K

     
 

Small R2K

R2K Contracting
May 6, 2018

Reseal and test two steering cylinders off a Muller TM31 Tractor

Small R2K

     
 

Small R2K

R2K Contracting
May 6, 2018
 

Replace all hydraulic hoses on a Chamberlain 9G tractor

Small R2K

     
 

Small R2K

R2K Contracting
May 6, 2018
 

Repairing a Vickers power steering cylinder off a Chamberlain F1000 Loader, new barrel and piston this time steel with a wear ring.

Small R2K

     
 

Small R2K

R2K Contracting
May 6, 2018
 

Reseal and test a Parker / Volvo F11-010 air seeder motor off a Simplicity box

Small R2K

     
 

Small R2K

R2K Contracting
May 6, 2018
 

Remove unneeded RD valve off a Marshall spreader causing hunting problems with the tractor with a PFC pump

Small R2K

     
 

Small R2K

R2K Contracting
May 6, 2018
 

Reseal and test an Ultra Hydraulic gear motor off a Flexicoil seeder fan

Small R2K

     
 

Small R2K

R2K Contracting
May 6, 2018
 

Supply components and plumb up a boom spray on a 4X4 truck in Merredin WA (sorry about the photos, ended up a late job)

Small R2K

     
 

Small R2K

R2K Contracting
May 6, 2018
 

Supplying hydraulic components and hosing up a 55′ by 8″ auger

Small R2K

     
 

Small R2K

R2K Contracting
May 6, 2018

Changing out problem John Deere quick release couplings with standard off the shelf QRC

Small R2K

     
 

Small R2K

R2K Contracting
May 6, 2018
 

Supply components and hose up a semi tipper with an un-loader auger on the tail gate

Small R2K

     
 

Small R2K

R2K Contracting
May 6, 2018
 

Supply and fit a gear type flow divider to supply the hydraulic feed to a Norrish Ezy-Bin

Small R2K

     
 

Small R2K

R2K Contracting
May 6, 2018
 

Machine up new stainless steel rods to replace chrome bar on the gate cylinders on a SeedHawk seeder cart.

WP_20180325_002

Small R2K

     
 

Small R2K

R2K Contracting
May 6, 2018
 

Overhaul and install an Eaton Hydrostatic transmission out of a Case IH 2188

 
Small R2K
 
     
 

Small R2K

R2K Contracting
May 6, 2018
 

Resealing the rotary coupling off the circle turn on a DRMCO 720 grader

Small R2K

     
 

Small R2K

R2K Contracting
May 6, 2018
 

Machining up a seal installing tool for the Tyne cylinders on a Ausplow bar

Small R2K

 
     
 

Small R2K

R2K Contracting
May 6, 2018

Mate up this old Conveyormatic with the Mack truck. The hydraulic motors are AHC brand.

Small R2K

     
 

Small R2K

R2K Contracting
May 6, 2018
 
Supplying motors and couplings and hose up a Marshall Spreader
 
 

Small R2K

     
 

Small R2K

R2K Contracting added 4 new photos.
March 3 at 1:58pm · 

It’s not that time of the year, but this is not a good find any time.

 
 
 
 

Small R2K

     
 

Small R2K

R2K Contracting added 2 new photos.
March 3 at 1:54pm · 

Testing phasing cylinders off a Midwest fronts reel lift mid stroke of leakage, this one leaked over the check valves (PTE Cylinder) they where removed and re lapped in and re tested all good

 
 
 
 

Small R2K

     
 

Small R2K

R2K Contracting

March 3 at 1:50pm · 

An Accumulator kit to help turn a John Shearer disc plough into a “Plozza Plows”

 
PLOZZA PLOW KIT
 

Small R2K

     
 

Small R2K

R2K Contracting added 8 new photos.
March 3 at 1:43pm · 

Reseal and test a Parker Hydraulic fan motor off a Ford tractor

 
WP_20180227_002WP_20180227_003WP_20180227_004WP_20180227_005

 

 

WP_20180227_007WP_20180227_008WP_20180227_009

 
 
 
 

Small R2K

     
 

Small R2K

R2K Contracting added 5 new photos.
March 3 at 1:40pm · 

The Troopy and the ute now have gas struts on the bonnet a small mod to the ARB battery box but fit and work well

 
 
 
 
 
 

Small R2K

     
 

Small R2K

R2K Contracting added 5 new photos.
March 3 at 1:37pm · 

Replacing damaged hydraulic pipes with new hoses on a grain auger

 
 
 
 
 

Small R2K

     
 

Small R2K

R2K Contracting added 5 new photos.
March 3 at 1:35pm · 

Reseal and test a hydraulic lift cylinder of a Flexi-Coil bar

 
 
 
 
 

Small R2K

     
 

Small R2K

R2K Contracting added 9 new photos.
March 3 at 1:30pm · 

Supply and fit a PTO pump and setup to run a semi mounted 5 in 1 bin as well as the road train tipper. they need two times 45 liters per minute @ 3000 Psi. it will run a rotary flow divider in the bin to split the flows. on test we have 90 liters per minute at 3000 Psi and a relief valve at the pump set to 3500 Psi.

 
WP_20180218_011

 

 

WP_20180218_008WP_20180218_007WP_20180218_006WP_20180218_005WP_20180218_004WP_20180218_003WP_20180218_002WP_20180218_001

 
 
 
 

Small R2K

     
 

Small R2K

R2K Contracting added 11 new photos.
March 3 at 1:22pm ·

Quoting up to replace a mechanically driven Cole 5 in 1 bin to total Hydraulic Drive, with all components around $7000.00 plus a bit of Johnny

 

Small R2K

     
 

Small R2K

R2K Contracting added 3 new photos.
March 3 at 1:14pm · 

Got to love Chamberlain power assist steering cylinders (Vickers)

 
WP_20180205_004WP_20180205_003WP_20180205_002

 

 

 
 
 
 

Small R2K

     
 

Small R2K

R2K Contracting added 24 new photos.
March 3 at 1:12pm · 

An Allison TT2221 power shift transmission out of a John Deere 444C front end loader, to much damage to repair.

 

Small R2K

     
 

Small R2K

R2K Contracting added 16 new photos.
March 3 at 1:01pm · 

Yet another CAV fuel injection pump reseal (might have to start “R2K Fuel Injection Services” soon) this one customer removed and replaced.

 

Small R2K

     
 

Small R2K

R2K Contracting added 7 new photos.
March 3 at 12:56pm · 

Carry out tests to a power lines pole planter, all good.

 
 
 
 
 

Small R2K

     
 

Small R2K

R2K Contracting
March 3 at 12:52pm · 

Fitting gas struts to the bonnet of the HZJ75 work ute.

 
 
 

Small R2K

     
 

Small R2K

R2K Contracting added 4 new photos.
March 3 at 12:49pm · 

Reseal the lever boxes of the control valve on a power line cherry picker

 
 
 
 

Small R2K

     
 

Small R2K

R2K Contracting added 6 new photos.
March 3 at 12:45pm · 

Ford Hew Holland control valve reseal and tested o-rings eroded away under shuttle valves

Small R2K

     
 

Small R2K

R2K Contracting added 6 new photos.
March 3 at 12:39pm · 

Another fuel injecting pump reseal this time a Chamberlain 4480 remove and replace.

 
 
 
 
 

Small R2K

     
 

Small R2K

R2K Contracting added 3 new photos.
March 3 at 12:33pm · 

Re plumbing a grain storage bag un-loader that was modified in Perth and hosed up in parallel instead of in series

 
 
 
 
 

Small R2K

     
 

Small R2K

R2K Contracting added 5 new photos.
March 3 at 12:28pm · 

New small grit blasted for the workshop, for doing fuel pumps and cylinder glands.

 
 
 
 
 
 

Small R2K

     
 

Small R2K

R2K Contracting added 10 new photos.
March 3 at 12:25pm · 

Replacing control valves for the out riggers on a power lines cherry picker

 

Small R2K

     
 

Small R2K

R2K Contracting added 5 new photos.
January 2 · 

Reseal and re-race of a PTO angle drive off a chaser bin

 
 
 
 
 
 

Small R2K

     
 

Small R2K

R2K Contracting added 11 new photos.
January 2 · 

Re- Power of a Cole Auger, Petrol engine, bell housing coupling and pump, new oil, return filter and filler breather, and a couple of hoses

Small R2K

     
 

Small R2K

R2K Contracting added 5 new photos.
January 2 · 

Reseal and test two CharLynn 2000 series hydraulic motors of a super spreader

 
 
 
 
 
 

Small R2K

     
 

Small R2K

 
R2K Contracting added 5 new photos.
January 2 · 

Re sealing and testing two hydraulic cylinders off a field bin. one had loctite under the lip of the gland seal the other the gland lip seal was put in wrong (from new) 

 
 
 
 
 

Small R2K

     
 

Small R2K

R2K Contracting added 6 new photos.
January 2 · 

Repair an air hose off a farm truck, re-uesing the ends

 
 
 
 
 

Small R2K

     
 

Small R2K

 R2K Contracting added 3 new photos.
January 2 · 

Repaired an oil leak on the outrigger control valve on a cherry picker doing the power lines at BK, the spool was damaged and the valve needs replacing, (next time)

 
 
 

Small R2K

     
 

Small R2K

R2K Contracting added 4 new photos.
January 2 · 

Repairs to a Hyster Forklift lift cylinders, looking at the gland seals it was way over due 

 
 

Small R2K

     
 

Small R2K

R2K Contracting added 6 new photos.
January 2 · 

Toyota Forklift repaired and back working, cylinder resealed and repairs to a couple of other leaks

 
 
 
 

Small R2K

     
 

Small R2K

R2K Contracting added 4 new photos.
January 2 · 

Replacing a worn out DCV on a Cole Auger

 
 
 
 
 

Small R2K

     
 

Small R2K

R2K Contracting added 11 new photos — in Bruce Rock, Western Australia.
December 1, 2017 · 

Repairs to a chain drive on a Napier chaser bin, all welds had turned the metal very hard and it wanted to push the tool away, was a job and a haft to do  had to grind the fillet weld off after I machined the sprocket away